[RE-wrenches] Flashing for flat roofs

[Lorenzo Ortiz]

Check out Quickmount's QBase-Chem-Link standoffs. We've used them on flat
rolled comp roofs and they seem to work pretty well. Just make sure you
order the right sized diameter.

On Mon, Nov 6, 2017 at 6:25 AM, AE Solar <autonomousenergies at gmail.com>
wrote:

> Wrenchers,
> We have a residential system that will sit on a small roof section  that
> has minimal pitch (5 degrees) and has been roofed with rollout asphalt
> roofing. Anyone have good products they recommend for flashing attachment
> points? Was going to have it re-done with EPDM. Thanks for any thoughts...
> Adam
>
> Adam Katzman
> Autonomous Energies
> PO Box 1245
> Kingston, NY 12402
> www.autonomousenergies.com
> (518) 567-1468
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


-- 
*Lorenzo Ortiz   Commercial Design/Support*

    lorenzo at cal-solar.com*  (530) 274-3671*

-- 
 <http://californiasolarco.com/referral-program/>