Dual DR's [RE-wrenches]

Windy Dankoff, Dankoff Solar windy at dankoffsolar.com
Mon Dec 18 11:20:05 EST 2000


<x-flowed>>
>Since this is the least expensive DR inverter, and Trace says it will handle
>3500 watts for 1 minute,  what do you think about using dual stacked DR1524's
>to run a well pump.  Has anyone done this or with the bigger DR's.  This
>would be cheaper than a PS2512 and theoretically could deliver more power.
>....
>John
>CVSolar


Hi John.

Stacked DR's can run a well pump, and you don't need a step-up 
transformer. The motor will be less efficient with a non-sine wave. 
Expect it to take about 20% more watt-hours per gallon than it would 
with a sine wave. Expect brief voltage dip during startup that will 
dim or blink lights in the house.

You didn't mention pump HP, but for guidelines, refer to our article 
"Running an AC Submersible Pump on Inverter Power" in our web site, 
Reference section.   www.dankoffsolar.com

I wouldn't hesitate to propose  DR2424 instead of a 1524, for the 
slight extra cost.

I would however hesitate on grounds of "mod" sine wave. People who 
have a materially simple lifestyle do very well with DR's (like 
people who have been living for years with little or no electricity). 
People with more electronics had better stick to sine wave. The 
trouble is, it's hard to predict who will start out in the first 
category and quickly transform into the second.

Windy

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics

</x-flowed>


More information about the RE-Wrenches mailing list