Inverter protection [RE-wrenches]

[Travis Creswell, Ozark Solar]

This makes more sense

Switch the source circuit feed from the top to the bottom.  Leave the
battery and inverter wires where they are.

Travis
----------
>From: "Travis Creswell, Ozark Solar" <ozsolar at ipa.net>
>To: RE-wrenches at topica.com
>Subject: Re: Inverter protection [RE-wrenches]
>Date: Mon, Dec 4, 2000, 9:45 AM
>

>If you remove the DC250 you will see a 1/4-20 (?) bolt the back that holds
>the lug to the breaker.  Switch the feed from the top to the bottom.

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics