E-meter [RE-wrenches]

[John Blittersdorf, Cent. VT Solar & Wind]

Travis,
   As far as the two stickers go, ignore the one on the input side.  Somebody 
got carried away with the stickers.  The ones I got had two stickers also.  
Just make sure you power the emeter with LESS THAN 48 volts or LESS or you 
will fry the emeter.  I know from experience!  It is best to tap off the 
battery at 24v.  The load is quite low and should not unbalance the batteries 
significantly.  

John 
CVSolar


- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics