Sunfrost noise/Propane Fridge [RE-wrenches]

allan allan at positivenergy.com
Fri Sep 29 13:22:33 EDT 2000


John,
    I agree that the Sun Frost still comes out ahead, but by less each year.
It's more and more situation-specific.  In our family's case, the economics
favored the less-efficient Maytag (at $800+) over the Sun Frost as the
dealer cost of more PV beat the dealer cost of the SF.  Likewise, I have
recommended a Maytag or Magic Chef to a customer because his fridge opening
isn't quite wide enough for the odd-size SF, and more PV is cheaper than
modifying a cabinet.
    In a way, given the ~2:1 ratio between the conventional fridges with
their 1" insulation thickness, and the SFs, I'm surprised the SFs use as
much energy as they do.

Allan
-----Original Message-----
From: John Blittersdorf, Cent. VT Solar & Wind <cvsolar at aol.com>
To: RE-wrenches at topica.com <RE-wrenches at topica.com>
Date: Friday, September 29, 2000 5:18 AM
Subject: Re: Sunfrost noise/Propane Fridge [RE-wrenches]


>Phil,
>   I tend to agree with you.  I bought a SunFrost RF12 about 8 years ago
and
>have never regretted it.  Its a 12VDC model and I have had to keep a 12v
>battery bank and PV's dedicated to it after I upgraded to the SW4024 but it
>just takes care of itself.  Defrost once a year whether it needs it or not
>and it quietly does its job. I ran it for years on 3 Kyocera 35 watt panels
>but did have trouble during long cloudy periods.  I added 2 80 watt Solarex
>panels to the 3 Kyoceras and now the batteries never go below 60 or 70%.  I
>recently gave a client a choice of a SunFrost or a Maytag with calculations
>showing similar total cost of frig  & PV,s and they opted for the SunFrost.
>The numbers are getting closer but the SunFrost is still a better deal in
our
>sun belt by about 10%.  A little more insulation in those commercial units
>and they may start to give SunFrost some competition if they can keep the
>price down.
>
>John
>CVSolar
>
>- - - - - - -
>To send a message:
> RE-wrenches at topica.com
>
>The archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
>To unsubscribe send a message to:
> RE-wrenches-unsubscribe at topica.com
>
>To check out the other RE-Wrench participants:
> www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine:
> www.homepower.com
>
>For info contact list moderator by email:
> michael.welch at homepower.com
>___________________________________________________________
>T O P I C A  The Email You Want. http://www.topica.com/t/16
>Newsletters, Tips and Discussions on Your Favorite Topics
>

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics


More information about the RE-Wrenches mailing list