Grundfos SQ ac pumps [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 09/28/2000 11:13:08 AM Pacific Daylight Time, 
ipl at sover.net writes:

<<  If not, that brings us to the 1/2HP SQ pump which will pump at 4 gpm at 40
 psi with 120' of head. The question on this pump is will it run on the
 Exeletech XP 1100 (1100 watt)12v inverter. According to the AEE chart the
 1/2HP pump will run on a 1200 watt inverter. So close. Does any one have any
 experience with the SQ series pumps and know what the actuall draw is?
  Will the 1/2HP pump draw less if we are operating in the mid range of its
 performance curve?
  >>
I don't have experience with these pumps but caution you not to design too 
close to the line.

Don :L

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics