comments to TRACE [RE-wrenches]
Mark Downing
solarman4 at yahoo.com
Mon Jul 10 08:50:25 EDT 2000
I don't know of a direct e-mail address, but you might
try Mick Kline on extension 2224. He claimed to be a
willing listener to problems. Others at Trace just
don't want to hear bad news.
Another possibility is Tony Boatright x2202 who helped
me when I had a copier that would not run on a SW2512.
For those interested, a Canon PC-330 will run on mod
sine, while its replacement the PC-430 will not even
accept Trace's SW version of sinewave power. The
copier gives as error display indicating "bad power"
and will not power up.
(Since this incedent, I refuse to call the SW output a
"pure sinewave". Mod-mod-sine is much more accurate.)
I was able to get the PC-430 to run by connecting a
small capacitor (.47 uF) across the inverter output.
This gave an ugly waveform on the ocilloscope, but the
copier was happy with it. Trace first suggested using
a much larger capacitor but I went as small as
possible so that the inverter could go to search mode.
Mark
Hurshtown Alternative Power
--- "Todd Cory, Bald Mt. Solar" <toddcory at jps.net>
wrote:
> Does anyone know an e-mail address for someone at
> Trace Engineering that
> will actually read it to suggest (again) a "silent
> sell" mode be offered
> in a future software upgrade?
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail ��� Free email you can access from anywhere!
http://mail.yahoo.com/
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>
To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/
To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>
To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>
Hosted by Home Power magazine: <http://www.homepower.com>
for info contact: <michael.welch at homepower.com>
___________________________________________________________
T O P I C A The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics
More information about the RE-Wrenches
mailing list