[RE-wrenches]

[indeppower at aol.com]

In a message dated 4/23/2000 10:32:57 PM Eastern Daylight Time, 
steve at backwoodssolar.com writes:

<< People are instructed now to run both + and - cables
 through the box, but you said you had done that.  They are usually tied
 together within, so the negative goes right past the side of the breaker and
 that seems to eliminate the magnetic caused vibration noise. >>

I was told years ago ( I think by ol "Lovable Larry" at Photron ) to always 
run the negative and positive cables through the same connector, or conduit, 
coming out of a steel box, or a magnetic field would be created between the 
cables in the steel.
    Dave Palumbo
- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
_________________________________________________________
Enlighten your in-box.         http://www.topica.com/t/15