Sharing a Shunt [RE-wrenches]

[Ray Walters]

For instance when 
>installing a shunt metering system and a Solar Boost controller, the 
>S Boost has an option to hook it to an external master shunt for 
>smarter regulating. Connect it to the same shunt as the meter, then 
>set the S Boost to the shunt characteristics. Very easy to do. 
>Confirmed OK in numerous installations.
>
Hi Windy:

We have had a problem using the same shunt, this was with a Solar boost 50
and the infamous E-Meter. E-meter's amp readings were off substantially.
You should expect this from Remote Tech by now. No one else will have
trouble till.....

Ray

 >- - - - - - -
>To send a message:
> RE-wrenches at topica.com
>
>The archive of previous messages: 
> http://www.topica.com/lists/RE-wrenches/
>
>To unsubscribe send a message to: 
> RE-wrenches-unsubscribe at topica.com
>
>To check out the other RE-Wrench participants:
> www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine: 
> www.homepower.com
>
>For info contact list moderator by email:
> michael.welch at homepower.com
>
>___________________________________________________________
>T O P I C A  http://www.topica.com/t/17
>Newsletters, Tips and Discussions on Your Favorite Topics
>
>

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com

___________________________________________________________
T O P I C A  http://www.topica.com/t/17
Newsletters, Tips and Discussions on Your Favorite Topics