heliotrope cc-50 questions [RE-wrenches]

[Richard Perez, Home Power magazine]

<x-flowed>Hello Jay

Actually it's a CC-60 and the dip switch settings are pasted to the 
inside of the front cover of the control. Remove the four screws 
holding on the cover and check it out. You are correct, the 
regulation voltage is set by DIP switches.

I have two of these controls here and can probably hunt up the docs 
if you really need them. All the set point instructions should be 
inside the front cover of the control.

Richard

>Hi all,
>
>I have a customer with an old CC-50 Heliotrope and I am looking for 
>help/manual.  I am trying to
>adjust the voltage setpoints.  There are dip switches, that look to 
>be the only adjustment
>points.
>
>Thanks,
>
>jay peltz
>peltz power

------------------------------------
Richard Pérez
Home Power
PO Box 520, Ashland, OR 97520  USA
Tele: 530-475-3179
FAX: 530-475-0836
Subscriptions: 800-707-6585
mailto:richard.perez at homepower.com
Web: http://www.homepower.com

- - - - - - -
To send a message:
 RE-wrenches at topica.com

The archive of previous messages: 
 http://www.topica.com/lists/RE-wrenches/

To unsubscribe send a message to: 
 RE-wrenches-unsubscribe at topica.com

To check out the other RE-Wrench participants:
 www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine: 
 www.homepower.com

For info contact list moderator by email:
 michael.welch at homepower.com
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics
</x-flowed>