Help with SW problem... [RE-wrenches]

[jay peltz]

Hi Roy,

1.  bad inverter
2. ground loop
3. two ground rods not bonded

Good luck!!

jay

And let us know what the problem is so that we can know!!

"Roy Butler, Four Winds RE" wrote:

> I sure hate to admit I'm stumped, but here goes...I have a customer with a
> single SW4024 who says her appliances keep burning out. So far (she says)
> she's had several appliances fail...her TV, furnace, washing machine,
> microwave and today...her refrigerator. Needless to say, she's pretty
> ticked off. My question to her was why did she tell me after the
> fact....these appliances failed over a 6 month period. I did not get a
> chance to look at the old appliances...I do know that the microwave was
> over 15 years old (!) as is the fridge. No clue on the TV or washer age.
> The furnace was only 1 year old (an oil burner) and it blew up! According
> to the insurance adjuster, oil accumulated in the combustion chamber and
> then ignited. I know how oil burners work and this sounded like a control
> problem to me...aren't there safety controls in place to prevent this from
> happening??
> System specs: SW4024 (w/ DC250) set to float mode w/ grid usage timer set
> to charge during off peak nighttime hours...900 watts of solar w/ Trace
> TC60 controller...1050 AH battery bank (Surrette CH375)...and all working
> according to specs. I have LA302AC surge arrestors in both the grid fed
> breaker box and the inverter fed sub-panel...LA302DC arrestors in both the
> DC250 and the sub-array combiner box. System and house grounding is up to
> code, as is my installation...I've done a lot of these SW installations and
> not had any problems until this one. I'm stumped!!!
> Please let me know if you have heard of similar problems or if you think of
> anything else I should check!
> Sleepless in NY
> Roy Butler
> Four Winds RE
>
> - - - - - - -
> To send a message:
>  <RE-wrenches at topica.com>
>
> The archive of previous messages:
>  <http://www.topica.com/lists/RE-wrenches/
>
> To unsubscribe:
>  <RE-wrenches-unsubscribe at topica.com>
>
> To check out the other RE-Wrench participants:
>  <http://www.mrsharkey.com/wrenches/index.html>
>
> Hosted by Home Power magazine:
>  <http://www.homepower.com>
>
> For info contact list moderator:
>  <michael.welch at homepower.com>
> ___________________________________________________________
> T O P I C A  The Email You Want. http://www.topica.com/t/16
> Newsletters, Tips and Discussions on Your Favorite Topics


- - - - - - -
To send a message:
 <RE-wrenches at topica.com>

The archive of previous messages: 
 <http://www.topica.com/lists/RE-wrenches/

To unsubscribe: 
 <RE-wrenches-unsubscribe at topica.com>

To check out the other RE-Wrench participants:
 <http://www.mrsharkey.com/wrenches/index.html>

Hosted by Home Power magazine: 
 <http://www.homepower.com>

For info contact list moderator:
 <michael.welch at homepower.com>
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics