Cutting Heat Shrink tubing [RE-wrenches]

[Bob Ellison, Alternative Energy Systems]

Chuck,
Have you tried a sharp razor blade (single edge) or utility knife? If you
are using the glue filled it will gum up scissors in a hurry.

Bob

-----Original Message-----
From:	Chuck Heath, SunPower [mailto:sunpwr at jps.net]
Sent:	Saturday, July 08, 2000 6:09 PM
To:	RE-wrenches at topica.com
Subject:	Cutting Heat Shrink tubing [RE-wrenches]

What's the best way to cut 4/0 heat shrink tubing?

Is there a better way than using scissors for smooth, clean cuts?

Cordially, Chuck Heath, from my tiny mountaintop cabin powered by
sunshine, where "our local park" is called Yosemite. sunpwr at jps.net

- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to:
<http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to:
<RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to
<http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics

- - - - - - -
To send a message to the list use: <RE-wrenches at topica.com>

To view an archive of previous messages go to: <http://www.topica.com/lists/RE-wrenches/

To unsubscribe send an email message to: <RE-wrenches-unsubscribe at topica.com>

To check out who the other RE-Wrench participants are, go to <http://www.mrsharkey.com/wrenches/>

Hosted by Home Power magazine: <http://www.homepower.com>

for info contact: <michael.welch at homepower.com>
___________________________________________________________
T O P I C A  The Email You Want. http://www.topica.com/t/16
Newsletters, Tips and Discussions on Your Favorite Topics