[RE-wrenches] Schneider XWpro

[Blair May]

Jay off or on grid?
If off then use the original firmware. You said it was new if off grid do
not update FW. If on grid then up date firmware, make sure "region Code" is
correct then reset ALL to factory defaults. Then see if that addresses it.
Access is Admin PW is XWproGridCode
Grid code password.
XWproGridCodes
Off grid code  1547- 2003

Blair "Tump" May





On Wed, Apr 29, 2026, 8:17 PM Jay via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

>
> Have a question
>
> Someone contacted me about trying to set up a new XWpro. Insight home no
> other devices.
>
> Inverter is on, led lights say it’s working there is 120/240v but it won’t
> power any loads.
>
> I told him to make sure they had both updated firmware but he ran into
> trouble
>
> Question
> Would incorrect firmware create that situation?  I mean it’s weird it’s
> got volts but won’t do watts.
>
> But XW/pros are not my expertise
>
> Thx
> Jay
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20260430/7ac7e7dc/attachment.htm>