[RE-wrenches] Outback FXR Slaves Not Charging With AC

[Jay]

And you set each inverter ac input amps as well?

Jay

> On Mar 16, 2026, at 6:40 AM, Jason Szumlanski via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> 
> I inherited am off-grid service client with four FXR3048A configured in 120/240 split phase with one master and one slave per leg. I believe I configured all of the AC input charging parameters correctly, requesting max charge rate from each inverter. However, when AC input is present (from a generator) the masters will bulk charge, but the slaves do not charge at all. The slaves do share the load, but show 0.0kW for charging.
> 
> Any ideas?
> 
> Jason Szumlanski 
> Florida Solar Design Group 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20260316/a23ac9b5/attachment.htm>