[RE-wrenches] removing old abosolyte cells.
david quattro
david at quattrosolar.com
Thu Jul 17 12:38:05 PDT 2025
If it’s not too steep you can continually leapfrog two or 3 pieces of
plywood, and roll your engine dolly on that. Or you can use a few cuts of
large diameter pipe as rollers.
On Thu, Jul 17, 2025 at 3:33 PM jay via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> I was out at the job site today with the customer with the old SI 4548.
> It’s going away, primarily because she wants a mini split and her inverter
> is too small at this point.
>
> She has of course a abosolyte battery, 6 cells per stack.
> I don’t know if they will slide out or not.
>
> But just thought I’d ask if anyone has any tricks.
> Oh and no it’s in a side room, no way to get any heavy equipment in there,
> and each stack is about 600#
>
> Maybe I could get an engine hoist in there, but outside the door is dirt
> and gravel and its a long ways to where I can put the trailer.
> I am anticipating having to remove the cells to deal with it.
> Cutting it apart with a right angle grinder is about the only trick I
> know. But I’m guessing there are others.
>
> Fortunately I can install the new equipment on the other wall so I don’t
> need to get the batteries out quickly.
>
> thanks in advance
>
> jay
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250717/40fa4449/attachment.htm>
More information about the RE-wrenches
mailing list