[RE-wrenches] iTools Gear Punch and Midnite AIO

[Jason Szumlanski]

Hi all,

Just a quick tip/warning. We use the iTools Gear Punch extensively, and
love it.

https://itoolco.com/product/gear-punch-knockout-set-1-2-4/

Unfortunately, the plastic bushings supplied with the Midnite AIO are too
large to fit the 2-in knockout holes produced by this gear punch. The 1-1/4
bushings work well.

I am going to try to see if another die set works with the punch tool. Does
anyone know a brand that works for sure with these bushings?


P.S. Some brands of PVC box adapters don't fit well in the holes produced
by the iTools die, either. All terminal adapters work in our experience.

Jason Szumlanski
Florida Solar Design Group
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250429/e55d16a4/attachment.htm>