<div dir="auto">Hi all,<div dir="auto"><br></div><div dir="auto">Just a quick tip/warning. We use the iTools Gear Punch extensively, and love it. </div><div dir="auto"><br></div><div dir="auto"><a href="https://itoolco.com/product/gear-punch-knockout-set-1-2-4/">https://itoolco.com/product/gear-punch-knockout-set-1-2-4/</a></div><div dir="auto"><br></div><div dir="auto">Unfortunately, the plastic bushings supplied with the Midnite AIO are too large to fit the 2-in knockout holes produced by this gear punch. The 1-1/4 bushings work well.</div><div dir="auto"><br></div><div dir="auto">I am going to try to see if another die set works with the punch tool. Does anyone know a brand that works for sure with these bushings? </div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto">P.S. Some brands of PVC box adapters don't fit well in the holes produced by the iTools die, either. All terminal adapters work in our experience. <br><div dir="auto"><div dir="auto"><br></div><div dir="auto">Jason Szumlanski </div><div dir="auto">Florida Solar Design Group </div></div></div></div>