[RE-wrenches] Midnite Powerflo Questions

[William Bryce]

There is no issue wall mounting as long as both mounting brackets are used
and the wall can support the weight. People do not read manuals and then
attach to wall that cannot support the weight.
On Fri, Feb 14, 2025 at 6:04 AM Jason Szumlanski via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Hi all,
>
> Is anyone willing to share with me a picture or two of the Powerflo5 in a
> stack configuration? I'm curious about best practices for battery cable
> routing to busbars.
>
> Regarding the Powerflo16, the manual says it must be wall/floor mounted
> with some of the weight supported by the floor, and not supported by the
> wall alone. But there is a diagram showing vertical separation requirements
> between batteries. I'm confused... Can these be wall mounted or not?
>
> Thanks,
>
> Jason Szumlanski
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250214/11370178/attachment.htm>