[RE-wrenches] Midnite Powerflo Questions

[Jason Szumlanski]

Hi all,

Is anyone willing to share with me a picture or two of the Powerflo5 in a
stack configuration? I'm curious about best practices for battery cable
routing to busbars.

Regarding the Powerflo16, the manual says it must be wall/floor mounted
with some of the weight supported by the floor, and not supported by the
wall alone. But there is a diagram showing vertical separation requirements
between batteries. I'm confused... Can these be wall mounted or not?

Thanks,

Jason Szumlanski
Florida Solar Design Group
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250214/4b0c5580/attachment.htm>