[RE-wrenches] Midnite Powerflo16 to old OB inverters

[Tyrone Houck]

I think the answer is using a flexnet DC's aux relay terminal to control
the on/off switch terminals of the FX inverter. You'll need a mate3S/SL but
that should do it without having to change the inverter...




On Sun, Feb 2, 2025, 8:52 PM Bill Battagin via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Have any off-gridders done a system with Powerflo16's to power pre-LFP
> OB/FX inverters?  The FM80's LFP settings in this system are compatible
> with LFP but I'm looking for options other than using the Aux in the
> CC's wired to a NC relay and from there to the inverter on/off landings
> in the green terminal of the OB/FX for the LBCO and reconnect function.
>
>              I've been down this road before, though a different
> equipment.  I've used the Aux from a Classic for inverter LBCO and
> reconnect though its never been fully "tested", although I read "open"
> and closed" at the un-wired aux landing when I forced it with a high
> LBCO setting.  Just thinking about the highest reliability.
>
>          Thanks in advance.
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, owner
> 4291 Nelson St. (Shipping)
> 5575 Genesee Rd
> <https://www.google.com/maps/search/5575+Genesee+Rd?entry=gmail&source=g>.
> (USPS, UPS)
> Taylorsville, CA  95983
> 530-284-7849, 258-1641(cell)
> CA. C10 Lic # 874049
> Solar Powered since 1982
> Home of the Sunny Side Up
>
>
> --
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250202/6d07828b/attachment.htm>