[RE-wrenches] Midnite Powerflo16 to old OB inverters

[Bill Battagin]

Have any off-gridders done a system with Powerflo16's to power pre-LFP 
OB/FX inverters?  The FM80's LFP settings in this system are compatible 
with LFP but I'm looking for options other than using the Aux in the 
CC's wired to a NC relay and from there to the inverter on/off landings 
in the green terminal of the OB/FX for the LBCO and reconnect function.

             I've been down this road before, though a different 
equipment.  I've used the Aux from a Classic for inverter LBCO and 
reconnect though its never been fully "tested", although I read "open" 
and closed" at the un-wired aux landing when I forced it with a high 
LBCO setting.  Just thinking about the highest reliability.

         Thanks in advance.

Bill

Feather River Solar Electric
Bill Battagin, owner
4291 Nelson St. (Shipping)
5575 Genesee Rd. (USPS, UPS)
Taylorsville, CA  95983
530-284-7849, 258-1641(cell)
CA. C10 Lic # 874049
Solar Powered since 1982
Home of the Sunny Side Up


-- 
This email has been checked for viruses by Avast antivirus software.
www.avast.com