[RE-wrenches] FM100 Stuck in Silent Mode.

[John Blittersdorf]

HI Wrenches,
   I  have an off grid site on an Island on auto pilot for the winter with
no access.  The FM 100
has remained in Silent mode even when the Array Voltage is around  150
Volts and battery at 46V
I did get a response from Outback Tech support but they couldn't figure out
what happened.
I suspect that there is a ground or arc fault error which locks it up til
manually recycled.  The problem is that there is no indication found on
Optics that there is a ground fault.
We would be totally in the dark except the original small solar array with
an Apollo CC with
about a kilowatt of solar has been dribbling in enough power to keep above
low battery cutoff
for a few hours each day.  The system was up when I was on the tech support
call but has since quit for the day. Has anyone seen this before?

John Blittersdorf
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20241210/f4c2abbb/attachment.htm>