<div dir="ltr">HI Wrenches,<div>   I  have an off grid site on an Island on auto pilot for the winter with no access.  The FM 100</div><div>has remained in Silent mode even when the Array Voltage is around  150 Volts and battery at 46V</div><div>I did get a response from Outback Tech support but they couldn't figure out what happened.</div><div>I suspect that there is a ground or arc fault error which locks it up til manually recycled.  The problem is that there is no indication found on Optics that there is a ground fault. </div><div>We would be totally in the dark except the original small solar array with an Apollo CC with</div><div>about a kilowatt of solar has been dribbling in enough power to keep above low battery cutoff</div><div>for a few hours each day.  The system was up when I was on the tech support call but has since quit for the day. Has anyone seen this before? </div><div><br></div><div>John Blittersdorf</div><div><br></div></div>