[RE-wrenches] SunPower Warranty and Monitoring
August Goers
august at luminalt.com
Fri Sep 27 16:03:33 PDT 2024
Hi Dave -
The sales rep, Parker, I spoke with at Enphase said that they don't have a
way of monitoring the SunPower Type C and D micros since those were
manufactured by SolarBridge. They do have an upgrade program where folks
can pay for new IQ7 micros, he said. They also have an upgrade program to
switch over to Enphase monitoring for $699 as you mention, but that is only
for IQ7AS and IQ7HS according to Parker. Were you able to get more info on
the potential monitoring for the C and D units?
Best,
August
On Fri, Sep 27, 2024 at 8:05 AM Dave Tedeyan via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> Hi All,
>
> I talked to Enphase recently about this. They will be providing warranty
> support at least for Sunpower's microinverters. They do not know how long
> Sunpower's monitoring will continue to work. But they have figured out a
> way to use their Gateway to monitor Sunpower's microinverters, even the
> older -C and -D micros. Currently the customer will need to pay a flat fee
> of $699 and Enphase will send them the equipment and then schedule one of
> their techs to come install it. It sounds like it involves some
> reprogramming of the equipment on site.
>
> Then once they can monitor the system, they can provide warranty support.
> People should call Enphase at 510-945-6752 in order to get the process
> started.
>
> Cheers,
> Dave
>
>
> On Tue, Sep 3, 2024, 11:56 AM Corey Shalanski via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Jason,
>>
>> Perhaps you also saw this headline:
>> Maxeon to offer warranty support for bankrupt SunPower
>> <https://pv-magazine-usa.com/2024/08/30/maxeon-to-offer-warranty-support-for-bankrupt-sunpower/?utm_source=SolarWakeup&utm_campaign=9ede8c7a6b-SolarWakeup_2_182_16_2013_COPY_01&utm_medium=email&utm_term=0_5eaa0aab62-9ede8c7a6b-44304797&mc_cid=9ede8c7a6b&mc_eid=f811e4c728>
>>
>> it doesn't address Enphase equipment separately/specifically - seemingly
>> only Maxeon modules (or ac modules with Enphase units attached).
>>
>> Corey Shalanski
>> Jah Light Solar
>> Portland, Jamaica
>>
>>
>> On Thurs, Aug 15, 2024 at 5:09 PM <jason at floridasolardesigngroup.com
>> > wrote:
>>
>>>
>>> As another one bites the dust, does anyone have insight into who, if
>>> anyone, will take over the warranty for Sunpower branded Enphase
>>> microinverters and if the SunPower monitoring will continue to work? Or
>>> maybe they can be software updated to work on the Enlighten portal?
>>>
>>> And also, would a system be able to be upgraded using Enphase branded
>>> microinverters if the software was made to be compatible?
>>>
>>> I'm sure there are more questions than answers at this point, but I
>>> wanted to get the discussion going.
>>>
>>> Jason Szumlanski
>>> Florida Solar Design Group
>>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240927/482c10aa/attachment.htm>
More information about the RE-wrenches
mailing list