[RE-wrenches] Xantrex XW6048 HOT!
Dave Angelini Offgrid Solar
offgridsolar at sti.net
Thu Jun 13 14:31:18 PDT 2024
Yes worrisome. The fault log will show possible causes. The
troubleshooting guide will tell you too look for black chunks of mosfet
transistors in the right bay of XW down low. Really rare, but in a hot
environment 10 years is pretty amazing.
All of the docs are on the Schneider site under XW 120.
https://solar.se.com/us/en/discontinued-products/
Dave Angelini Offgrid Solar
"we go where powerlines don't"
[1]https://offgridsolar1.com/ [2] [1]
e-mail offgridsolar at sti.net
text 209 813 0060
On 2024-06-13 2:22 pm, Jason Szumlanski via RE-wrenches wrote:
> Yes, I checked the air flow. It seems equal to the others. It's really
> strange because after turning off Inverting and Charging, the unit is
> idle and does not cool down. That's worrisome.
>
> Jason Szumlanski
> Principal Solar Designer | Florida Solar Design Group
> NABCEP Certified Solar Professional (PVIP)
> Florida State Certified Solar Contractor CVC56956
> Florida Certified Electrical Contractor EC13013208
>
> On Thu, Jun 13, 2024 at 1:12 PM Kevin Pegg via RE-wrenches
> <re-wrenches at lists.re-wrenches.org> wrote:
>
>> Hi Jason,
>>
>> Have you checked the black removeable air intake filter on the bottom
>> of the inverter to make sure it's not clogged up? Check fan operation
>> with a piece of paper above the inverter - is it blowing air? That's
>> where I'd start.
>>
>> Kevin
>>
>> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On
>> Behalf Of Jason Szumlanski via RE-wrenches
>> Sent: June-13-24 8:01 AM
>> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>> Cc: Jason Szumlanski <jason at floridasolardesigngroup.com>
>> Subject: [RE-wrenches] Xantrex XW6048 HOT!
>>
>> I'm looking at an off-grid quad inverter setup for a client, not my
>> installation. One of the stacked.inverters is extremely hot, sometimes
>> it goes into F66 and takes down the adjacent inverters with it to F66
>> probably because of these Xanbus network is broken.
>>
>> I disabled charging and discharging on the inverter that is getting
>> hot, but it's still remains very hot. Any ideas?
>>
>> I tried to put that one inverter in standby, but the generator will
>> not sync with the remaining three and charge the batteries. So I have
>> to leave it in normal operating mode for the moment.
>>
>> Jason Szumlanski
>>
>> Florida Solar Design Group
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try
>> the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
Links:
------
[1] http://members.sti.net/offgridsolar/
[2] https://offgridsolar1.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240613/e90e4f3c/attachment.htm>
More information about the RE-wrenches
mailing list