[RE-wrenches] Mate3s error vs. event log

[Nick A Lucchese]

Hello Kirk,

Does the client rely on the fully charged indicator anyway? Perhaps defeat some of the settings that will satisfy the targets of the Flexnet? Maybe set the “charged voltage” to something a few volts higher than your absorption set point and/or take the timer all the way up to 240 minutes? It’s definitely frustrating that some clients are scared to press any buttons on the Mate, even that Events button can intimidate apparently!

Nick
 

> On Apr 1, 2024, at 12:08 PM, Kirk Herander via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> Hello All,
> 
> I have a customer with a OB Radian GS8048A, grid tied, which logs a "charged parms met" message regularly. When it does, the event log LED on the 3s starts blinking. My customer thinks it's an error, and calls me. I Wish I could somehow defeat this event, and any non-error, from blinking the event LED for everyone's sanity.
> 
> Charged parms met is not an error, but it's crying fire in a theater to have this annoyance occurring. It happens several times a week. Is there any way to keep non-errors from flashing the LED?
> 
> OB tech support is starting to have long lead times, so I am asking here first. Thanks.
> 
> -- 
> Kirk Herander /  <>kirkh at vermont.solar <mailto:kirkh at vermont.solar>
> Owner|Principal, VT Solar, LLC
> Celebrating our 33st Anniversary 1991-2024!!
> dba Vermont Solar Engineering
> 802.559.1225
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240401/ee9eaf66/attachment.htm>