[RE-wrenches] Fwd: Re: Cantilevered array
William Miller
william at millersolar.com
Sat Jan 13 09:42:45 PST 2024
Drake
My earlier reply may have been a bit facetious. What I meant by it was
that big-box solar contractors can be lazy when it comes to solar design.
They will rely totally on satellite imagery and not check the design on the
ground. This is how you get solar proposed for shaded areas, where
skylights and roof vents are located, or overhanging thin air. This may be
what is happening in the image you shared.
What is unique here is someone actually specified overhanging panels.
Looking more closely at the image, a roof outline is shown but it is not
clear that the outline is actually situated over a building. It almost
looks like there is landscaped area inside the outline.
The solution of course is to get on out there, measure the roof and any
obstructions and analyze the shading. I use the Sun Seeker
<https://apps.apple.com/us/app/sun-seeker-tracker-surveyor/id330247123> app
for IOS for the shading analysis.
William
Miller Solar
17395 Oak Road, Atascadero, CA 93422
805-438-5600
www.millersolar.com
CA Lic. 773985
*From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
Behalf Of *Drake Chamberlin via RE-wrenches
*Sent:* Saturday, January 13, 2024 8:47 AM
*To:* RE-wrenches
*Cc:* drake.chamberlin at redwoodalliance.org
*Subject:* [RE-wrenches] Fwd: Re: Cantilevered array
Here is a larger snip of the situation.
[image: cid:image001.png at 01DA4604.457F8710]
Label says overhang from upper roof.
*Drake Chamberlin*
*Athens Electric LLC*
*Ohio Electrical Contractor’s License 44810*
*NABCEP Certified PV Installation Professional*
---
On 2024-01-12 07:29, Jason Szumlanski wrote:
Are you sure that's what you're looking at? To me, that looks like there
was an addition made to the house, and maybe it's a multi-pitch roof. That
lower part might be a covered wrap-around porch.
Jason Szumlanski
Principal Solar Designer | Florida Solar Design Group
NABCEP Certified Solar Professional (PVIP)
Florida State Certified Solar Contractor CVC56956
On Thu, Jan 11, 2024 at 5:59 PM Drake Chamberlin via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
I was given a drawing, produced by a very large solar company, showing the
array cantilevered over the edge of the roof by several feet.
[image: cid:image002.png at 01DA4604.457F8710]
Notice how the array hangs out over the lawn for several feet. Is there
anyway that this is a legitimate way to mount modules?
Thanks,
Drake
*Drake Chamberlin*
*Athens Electric LLC*
*Ohio Electrical Contractor's License 44810*
*NABCEP Certified PV Installation Professional*
--
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the
other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240113/7f455fc9/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 324637 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240113/7f455fc9/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 175783 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240113/7f455fc9/attachment-0003.png>
More information about the RE-wrenches
mailing list