[RE-wrenches] Automatic load control

david quattro david at quattrosolar.com
Fri Dec 15 01:20:39 PST 2023


SPAN Panel, or

you can try Generac 7006 automatic load shed device (100A)
https://apelectric.com/generac-7006-smart-management-module/
Or G7000 (50Amp)
I’ve heard they work with other inverters, not just GENERAC only, but of
course you’d have no warranty when mixing brands.
David



On Thu, Dec 14, 2023 at 6:36 PM Howie Michaelson via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Hi all,
>
> I am trying to figure out best options to control loads in a  Sol-Ark15k
> battery backup residential system.  It's been quite a few years since I've
> set up an automatic load control, and never with a Sol-Ark. The Sol-Ark
> will output to the main breaker panel, so no separate "backed up" panel -
> all house loads will likely be on the Sol-Ark's load side.
>
> What do folks like to use in this type of circumstance to automatically
> shed loads when the grid is down,  either sequentially as the battery bank
> drops down or more simply triggered by loss of grid? Are they pieces of
> equipment that work specifically with the Sol-Ark?
> I'd also be open to considering Fortress's Envy, if there is an option
> that would work well specifically with it.
> I'm interested in the range of options from simple to complicated, as long
> as it is automated.  All automated ideas/options appreciated.
> Thanks!
> Howie Michaelson
> Sun Catcher
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20231215/cb18ef77/attachment.htm>


More information about the RE-wrenches mailing list