[RE-wrenches] Silfab

[jasonl at mendocinosolar.com]

Hi Howie,

We have installed probably 150 jobs with Silfab modules.  First their 
330W, then their 370 half cell modules and now their 400 watt modules.  
We have had good experiences with them and there relatively inexpensive 
for an A tier module.  They manufacture them in Washington state and the 
company is based in Canada.  This helps fill our priorities of sourcing 
products from North America as much as possible.
We have had two modules with issues.  One being a module that dropped 
out about mid day, and the second having a partial voltage reading.
I troubleshot both and found that Silfab was decent at responding with a 
warranty credit for replacement through our supplier.  I would say that, 
overall, the value Silfab brings is quite high while also being decently 
priced.

Jason Lord
Mendocino Solar Service


On 2023-08-21 7:21 pm, Howie Michaelson via RE-wrenches wrote:
> Hi All,
> I have heard mixed comments about Silfab modules.  If anyone has
> experience with these panels, I would appreciate any feedback
> available.
> Thanks,
> 
> Howie Michaelson
> Sun Catcher
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org