[RE-wrenches] Sol-Ark 15k Conduit Entries

Michael Morningstar mjmorningstar at gmail.com
Fri Aug 4 09:55:32 PDT 2023


I just checked out the Homegrid batteries. Just throwing this out there. If
there is enough ceiling height you could hang them. That's typically how we
deal with transformers in commercial and industrial settings. We usually
build a permanent gantry out of square tubing, 1/2" rod and strut. Then
ratchet strap or chain hoist them up. Just an idea.

Yes Dave, that's the one.

On Fri, Aug 4, 2023 at 9:48 AM Dave Angelini Offgrid Solar via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Very nice Install Michael!  Was that the project on the xxCloud River we
> talked about?
>
> It looks like you have kept the gutter heat gain down to protect
> electronics.  “the rule of thumb is that every 10°C increase in
> temperature reduces component life by half”
>
> https://www.electronics-cooling.com/2017/08/10c-increase-temperature-really-reduce-life-electronics-half/
>
>
>  *Dave Angelini Offgrid Solar
> "we go where powerlines don't"
>    <http://members.sti.net/offgridsolar/>https://offgridsolar1.com/ <https://offgridsolar1.com/>  <http://members.sti.net/offgridsolar/>
> e-mail  offgridsolar at sti.net <offgridsolar at sti.net>
> text 209 813 0060*
>
>
> On 2023-08-03 10:08 am, Michael Morningstar via RE-wrenches wrote:
>
> Hi Drake,
> Those are single phase combiner panels. I would have loved to set this up
> as a three phase system, but there was already a mile of underground single
> phase run throughout the property. We ended up running a half mile 15KV
> line from the power site to the estate. This is an aside, it's kind of hard
> to see, but for seperation, we attached  the pv circuits to the back of the
> gutter using through bolted adhesive backed cable tie holders. Often we use
> gutter dividers. They originate in the tall cabinet at the end which houses
> controls, secondary PV disconnects, AC and DC egauges, Tigo hub, Battery
> hub and (Lynk II). On the opposite end is a similar cabinet for the
> collection and distribution of AC circuits. Also, above and below the
> batteries are small gutters for communications and CT wires that run from
> the transfer switches to eguage. One transfer switch to alternate usage
> (alternating relay) or bypass between Gen 1 and Gen 2, and the other switch
> to select inverter or generator power, locally or remotely. In the AC
> cabinet there is a 400a contactor and time delay relay to achieve a
> generator cooldown as the janky Sol-Arks don't do that and it's hell on new
> diesels not to have that function.
>
>
> ___________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
>
> --
>
>
>
> Michael Morningstar
>
>
>
> Morningstar Electric
>
> PO Box 1494
>
> Mount Shasta, CA 96067
>
> 530-921-0560
>
> mjmorningstar at gmail.com
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 

Michael Morningstar


Morningstar Electric

PO Box 1494

Mount Shasta, CA 96067

530-921-0560

mjmorningstar at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230804/218fb96c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: blocked.gif
Type: image/gif
Size: 118 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230804/218fb96c/attachment.gif>


More information about the RE-wrenches mailing list