[RE-wrenches] Remote load shedding

[Glenn Burt]

There are a couple of smart panel options available like Lumin and SPAN but may be more involved than what you are looking for -GlennSent from my 'smart'phone, so please excuse typos and spelling errors.------ Original message------From: Mac Lewis via RE-wrenchesDate: Tue, Jun 27, 2023 1:06 AMTo: RE-wrenches;Cc: Mac Lewis;Subject:[RE-wrenches] Remote load sheddingHello Wrenches,Is anyone aware of a remote load shedding solution that doesn't require additional signal wiring to the loads?Generac has a great solution for this that they adapted from their generator business called a Generac Smart management module.  Its a 2P x 50A relay that monitors line frequency going to the load and it will trip it off line when the frequency sags.  The inverter does a small wiggle that will trip it offline based on some Dip switch settings. on the unit.  This really simplifies code compliance in some cases.I'm wondering if there are any other more general solutions out there for this.Thanks in
 advance!-- Mac Lewis"Yo solo sé que no sé nada." -Sócrates
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230627/14115a12/attachment.htm>