[RE-wrenches] Old and new Radian

[Maverick Brown]

You could find a used not a version of the Radian to Parallel.

Or you could make the new a version, the master, and only inverter on your main electrical panel and use the old not a version as your generator battery charger and off grid vehicle charger tied to the same existing battery bank. The downside of this technique is that you’ll need a new additional hub and a new additional mate. The upside is you can marry the two mates together in one system on OpticsRE . 

Thank you,

Maverick


> On May 10, 2023, at 10:05 AM, frenergy via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
>         The wrench list has some very creative thinkers that may have a go around to be able to master/slave an old Radian's output with a new one.   Outback says this is not do-able.   We're completely off-grid out here and have been charging EVs (one at a time) with an eleven year old Radian (GS8048) for years but the Ford Lightning is on its way.  Outback says I can't add the newer GS8048A to exiting version (no "A").
> 
> Ideas??
> 
> Bill
> 
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.(shipping)
> 5575 Genesee Rd. (USPS, UPS)
> Taylorsville, CA 95983
> 530.284.1925 Office/ 530.258.1641 Cell
> CA Lic 874049
> Solar powered since 1982
> 
> 
> -- 
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>