[RE-wrenches] Attaching Array To or Through Ply
Kristopher Schmid
solman at legacysolar.com
Wed Mar 29 08:09:01 PDT 2023
Very timely post for me, Matt. Thanks.
I was just asked to bid a roof mount with SIP panels. My first thought is
to just say no. I am very hesitant to rely on the pull out strength of
screws in OSB.
I will be watching this thread.
Shine On!
Kris Schmid
Legacy Solar, LLC
137 West 1st Avenue
Luck, WI 54853
www.legacysolar.com
715-653-4295
NABCEP Certified PV Installation Professional
Licensed Wisconsin Master Electrician
BSEE
On Wed, Mar 29, 2023 at 9:37 AM Matt Sherald via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> Hi All,
>
> I've run into a roof-mounted job where the roof is built-up with the
> following:
>
> Comp shingle
> Plywood
> Foam board
> T&G (roof deck, but also interior ceiling)
>
> The beams that hold the t&g up are wide-spaced and not convenient for
> fastening the full extent of the array.
>
> This being the case, I was considering other fastening options and am
> writing to pick the collective brain of the Wrenches to see how others have
> addressed similar situations.
>
> One thought I had was to use the PLP Easy Mounting Foot and I'd be glad
> for any opinions on that or another solution.
>
> -Matt
>
> --
> Matt Sherald
> PIMBY Energy, LLC
> 304-704-5943
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230329/96b6f1a1/attachment.htm>
More information about the RE-wrenches
mailing list