[RE-wrenches] Solarworld 285 watt end frames

[Kristopher Schmid]

I use "fir tree" zip ties that will pop into the ground holes in the frame.

On May 24, 2017 8:11 AM, "Dana" <dana at solarwork.com> wrote:

> I am installing SolarWorld 285 w modules for our new home on Array
> Technologies dual axis trackers [we are in a canyon].
>
> The side rails of the frames are typical with a flange however the short
> end frame is this little kind of “I” beam that does not allow for any wire
> clips.
>
> I am wondering what other folks have done in this situation, short of
> drilling the module frame?
>
> SnapnRack has a ¾” thick clamp that creates a 7/8” min gap between the
> module columns that is rather unsightly.
>
> Suggestions?
>
>
>
> ------------------------------------------------------------
> ----------------
>
> Dana Orzel                       Great Solar Works, Inc.
>
> *208.721.7003 <(208)%20721-7003>                       dana at solarwork.com
> <dana at solarwork.com>*
>
> Idaho Contractor - # 028765          Idaho PV # 028374
>
> NABCEP # 051112-136                       www.solarwork.biz
>
> *"Responsible Technologies for Responsible People since 1988"  *
>
> *P* Please consider the environment before printing this email.
>
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170524/4466e159/attachment-0002.html>