[RE-wrenches] OutBack FX Internal Fan running 24/7

[Jay]

Hi Dave,

Did you replace the temp sensor?

Jay
Peltz power. 

> On Apr 30, 2017, at 6:30 AM, Dave Palumbo <palumbo131m at gmail.com> wrote:
> 
> Wrenches,
>  
> We recently swapped in a new internal fan on a OB FX 2524T after the original fan stopped working on the 6 yr old inverter.
>  
> Now the new internal fan is running all the time. Unrelated to temperature (Air, Fet and Cap temps all good). I've tried removing all loads from the inverter and also resetting the inverter (off/on).
>  
> OutBack tech support says the control board is the most likely cause of this problem and that I should buy a new board and swap that in. Or, as another option he said I could let the fan continue to run 24/7.
>  
> Any advice?
>  
> Thanks,
> Dave
>  
> David Palumbo
> Independent Power LLC
> 462 Solar Way Drive
> Hyde Park, VT 05655
> 802-371-8678 cell
> 802-888-4917 home
>  
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170430/03cf44d4/attachment-0002.html>