[RE-wrenches] Discharging a high voltage battery

Starlight Solar Power Systems larry at starlightsolar.com
Thu Feb 23 15:14:25 PST 2017


Hello August,

Help me understand your point. If the MPPT circuit is sweeping, it will see the same voltage everywhere. Would it not just continue sweeping because it can’t lock on? Or perhaps it times out? As long as it is producing power during that process, won’t it be fine? 

Thanks to all for the responses. 

Larry




On Feb 22, 2017, at 1:04 PM, August Goers <august at luminalt.com> wrote:

Larry –
 
My immediate thought is that you would need a listed grid tied inverter designed for the purpose of connecting to this type of battery and inverting to the grid. A regular PV inverter won’t cut it since it is designed to MPT PV modules. 
 
The SolarEdge StorEdge product sounds like the closest thing on the market that might be close to working. But, once again, it needs to be setup to work with your particular battery. I think StorEdge is planning on working with Tesla and LG Chem RESU batteries in the 350 to 400 v range. 
 
August
 
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org <mailto:re-wrenches-bounces at lists.re-wrenches.org>] On Behalf Of Starlight Solar Power Systems
Sent: Wednesday, February 22, 2017 11:17 AM
To: RE-wrenches
Subject: [RE-wrenches] Discharging a high voltage battery
 
Hello Wrenches,
 
Someone has asked me about discharging their EV battery into the grid. They have an existing grit tie system. What they want to do is connect a 5kW grid tie inverter to their 340 volt, 32kWh EV battery bank and feed the grid to discharge the battery. Why was not discussed but sure bugs me. 
 
My uneducated guess is the inverter will be immediately damaged. My thought is how would it limit the input current? Or, is there such an inverter available that can do the job?
 
Any input is appreciated. 

Larry Crutcher
Starlight Solar Power Systems
 
 
 
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170223/9da37ee8/attachment-0003.html>


More information about the RE-wrenches mailing list