[RE-wrenches] Outback Optics weird behavior

[William Miller]

Friends:



I have noticed something strange in Outback Optics.  On my systems, the
setup has lost information about the model number of all inverters.
Outback tech support has been stripped of many access privileges so they
can’t help me trouble shoot this.



I am asking if anyone of you with Optics systems if you can check to see if
your inverters have a model number set in the device registration screen.
This is accessed by clicking device map and then clicking on any inverter
icon.



Your feedback will be most helpful, and if you have this problem, you will
want to know.



I have attached a screen shot of the pop-up showing the problem.  Scroll to
the bottom of this message for the link.



Thanks in advance,



William Miller





[image: Gradient Cap_mini]
Lic 773985
millersolar.com <http://www.millersolar.com/>
805-438-5600
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170627/e56235b8/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 1777 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170627/e56235b8/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Device Registration.JPG
Type: image/jpeg
Size: 73773 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170627/e56235b8/attachment-0001.jpe>