[RE-wrenches] MATE3 restart

[William Miller]

Jesse:

You may have an intermittent Ethernet connection. Pressure on a button may
move the Mate3 chassis in a subtle amount, but enough to disturb the
connections to the device. I suggest you try a temporary, factory made or
known good Ethernet cable.

You might want to be very careful that you don't accidentally plug the hub
cable into the internet port.  I believe it is possible that you could
damage the internet port by doing so.

William Miller


Lic 773985
millersolar.com
805-438-5600

-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
Behalf Of Solar
Sent: Friday, November 04, 2016 4:24 AM
To: Wrenches <RE-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] MATE3 restart

All,

We have a MATE3 on campus that resets each time you press a button to
leave the main screen.  For example, we will press the "charger" button
followed by pressing the "graph" button, at this point the screen will
stall. The other buttons won't work at this point and the MATE will shut
off and restart.


Jesse Dahl

NABCEP PV Installation Professional
IBEW Local 292 - Electrician
Electrical/Solar PV Instructor - HCC

Sent from my iPhone
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.htm
l

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org