[RE-wrenches] PV Recombiner

Jason Lerner wapalco at rockisland.com
Mon Oct 10 20:25:58 PDT 2016


Hello William,

How about using an Outback Flexware 500/1000 AC circuit breaker box with DC rated DIN rail mounted breakers?  The Main breaker might need to live in the GSLC though…..

Best,

Jason Lerner

Waldron Power and Light Co.

> On Oct 10, 2016, at 2:55 PM, William Miller <william at millersolar.com> wrote:
> 
> Friends:
>  
> I am looking for a PV recombiner.  I need to accept the outputs from 3 remote PV Combiners, send those outputs through GFP circuit breakers, into charge controllers, back thorough breaker, into a bus bar, through a main breaker and onto a large battery bank.
>  
> I am using 2 Outback Radian inverters, but I refuse to install DC breakers on their dead-front because wiring to studs facing away from the front is an inferior design.  Furthermore, I see no need to run PV circuits through the GSLC cabinets.
>  
> I looked at the Midnite MNDC15 but again, these use panel mounted breakers with studs on the back.
>  
> Anyone know of a more thoughtfully designed PV recombiner?
>  
> Thanks in advance,
>  
> William Miller
>  
>  
> <image003.jpg>
> Lic 773985
> millersolar.com <http://www.millersolar.com/>
> 805-438-5600
>  
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html <http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html>
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20161010/d3d3a8b6/attachment-0002.html>


More information about the RE-wrenches mailing list