[RE-wrenches] Sub Panel Mounted on Roof Slope

Kirpal Khalsa solarworks at gmail.com
Thu Sep 29 13:58:33 PDT 2016


Dana.....we have used the Eaton Cutler Hammer custom enclosures from their
Lincoln Flex Center.... They will make you any NEMA rated enclosure you
like.....with a variety of box materials.  We have used them to make us
some 4X AC load centers....Expensive and takes a few weeks but works well.
We order them from our local Platt Electric supply house.  Any of the
Cutler Hammer distributors should be able to order them for you.
You can do a search on Google and you will find all the info you need.
Good luck!

Kirpal
Oregon Solarworks

On Sep 29, 2016 1:38 PM, "Jason Fisher (STC)" <stc.jason at gmail.com> wrote:

I saw some interesting new AC combiners from SolarBOS at SPI. Might want to
check with them depending on exactly what you are using this equipment for.

Jason Fisher

On Thu, Sep 29, 2016 at 4:28 PM, Ryan Mayfield <ryan at renewableassociates.com
> wrote:

> Bentek has a product listed on their site that may fit the bill, although
> there isn’t much in the way of documentation:
> http://www.bentek.com/solar-products/disconnect-systems/ac-powerbuss/
>
>
>
> Ryan
>
>
>
>
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
> Behalf Of *Chris Mason
> *Sent:* Thursday, September 29, 2016 1:12 PM
> *To:* RE-wrenches <re-wrenches at lists.re-wrenches.org>
> *Subject:* Re: [RE-wrenches] Sub Panel Mounted on Roof Slope
>
>
>
> Specify NEMA12.
>
>
>
> On Sep 27, 2016 19:30, "Dana Brandt" <dana at ecotechenergy.com> wrote:
>
> Hi Wrenches,
>
>
>
> Does anyone know of a 480VAC panelboard that can be mounted flush to a 10
> degree pitched roof as opposed to vertically?
>
>
>
> Thanks,
>
>
> Dana
>
> Dana Brandt
> Ecotech Energy Systems, LLC
> www.ecotechenergy.com
> dana at ecotechenergy.com
> 360.318.7646
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.or
> g/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.or
> g/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Jason Fisher
434-409-8173
stc.jason at gmail.com


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160929/dfae3409/attachment-0002.html>


More information about the RE-wrenches mailing list