[RE-wrenches] Wire nuts

[Mike Nelson]

Sometimes the code is wrong......,

Michael D Nelson
MD Electric & Solar, Inc.
707-684-0064 mobile
707-884-1862 office
www.mdelectricsolar.com
Sent from my iPhone

> On Sep 6, 2016, at 5:21 PM, Glenn Burt <glenn.burt at glbcc.com> wrote:
> 
> Do you mean beyond the NEC listing violation?
> From: Benn Kilburn
> Sent: ‎9/‎6/‎2016 19:21
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Wire nuts
> 
> August, et al,
> Do you have any issues with crimping the fine wires that are typically on a microinverter cable, to a coarse stranded or solid wire? 
> Or, do you know if there is an issue with using these crimps with fine stranded wire?
> 
> Benn Kilburn
> SkyFire Energy Inc. 
> 780-906-7807
> 
>> On Sep 6, 2016, at 3:55 PM, August Goers <august at luminalt.com> wrote:
>> 
> 
> [The entire original message is not included.]
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160906/07078510/attachment-0002.html>