[RE-wrenches] OB FW Lightning Protection w/ EPanel
bob at midnitesolar.com
bob at midnitesolar.com
Sun Aug 28 22:40:51 PDT 2016
On 8/28/2016 9:14 AM, Jeremy Rodriguez wrote:
> Do you if the wiring from the E panel will reach with the AC conduit
> box in place on the FX?
>
> Jeremy Rodriguez
> Solar Installation And Design Expert
> All Solar, Inc.
> 1463 M St
> Penrose Colorado 81240
Can't remember 100% but the conduit box has one big knockout and we have
flex conduit around.
Some rewiring may be required but it is only 3 wires so no biggie.
If this is a custom E-Panel, and some of them are, then we can certainly
make it with longer wires.
boB
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
>
> On Aug 27, 2016, at 10:02 PM, "bob at midnitesolar.com
> <mailto:bob at midnitesolar.com>" <bob at midnitesolar.com
> <mailto:bob at midnitesolar.com>> wrote:
>
>>
>> MidNite Solar stopped making the skinny OB E-Panels but we still make
>> many models of the wide OB E-Panels.
>>
>> It still works fine with the OutBack surge arrestor in their AC
>> conduit box.
>>
>> boB
>>
>>
>>
>> On 8/27/2016 2:30 PM, Howie Michaelson wrote:
>>> H Jeremy,
>>>
>>> It has been years since I used Outback's Arrestors (I switched to
>>> Midnite's so I'm not sure if Outback's design has changed since
>>> then), but yes that is how it worked on an E-panel. However, I
>>> think Midnite has stopped making the Epanel for the FX (FXR),
>>> although maybe you can find one in stock at a supplier. Might be
>>> worth a call to Midnite...
>>>
>>> Howie
>>>
>>> *Howie Michaelson*
>>> /NABCEP Certified Solar PV Installerâ„¢/
>>> Sun Catcher, LLC
>>> Renewable Energy Systems Sales and Service
>>> VT Solar Electric Incentive Partner
>>> 802-272-0004
>>>
>>> On Sat, Aug 27, 2016 at 4:07 PM, Jeremy Rodriguez
>>> <allsolarjeremy at msn.com <mailto:allsolarjeremy at msn.com>> wrote:
>>>
>>> Wrenches,
>>> Has anyone installed one of the outback Lightning protection
>>> devices designed to fit inside the AC conduit box of an FX
>>> inverter, with the FX mounted to an E panel?
>>> Just looking at some pictures it appears that it may work by re
>>> locating the flex conduits coming from the E panel, to the sides
>>> of the OB ACA vs. where they originally land.
>>> Any thoughts or experiences would be appreciated!
>>>
>>> Jeremy Rodriguez
>>> Solar Installation And Design Expert
>>> All Solar, Inc.
>>> 1463 M St
>>> Penrose Colorado 81240
>>>
>>> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160828/b4c99d3f/attachment-0002.html>
More information about the RE-wrenches
mailing list