[RE-wrenches] Pass through/transition box for Enphase

[Benn Kilburn]

Din rail mounted terminal blocks.... Weidmuler WDU6 or WDU10, depending on the wire size you are using. 

Benn Kilburn
SkyFire Energy Inc. 
780-906-7807

> On Aug 8, 2016, at 12:49 PM, Jason Szumlanski <jason at floridasolardesigngroup.com> wrote:
> 
> I'm looking to bring 8 Enphase 240V circuits in multiple conduits into an enclosure inside the attic where I can transition to Romex. I'd rather use some kind of rail mounted terminals in an enclosure or something rather than making splices in a generic j-box. I'm not looking to combine circuits - just transition from THWN to Romex and keep things neat an organized.
> 
> Any suggestions?
> 
> Jason Szumlanski
> 
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160808/1dc2004e/attachment-0002.html>