[RE-wrenches] Mate3

[Lones Tuss]

Hello Bill
 Doing so presents no problem to the system or the Mate3.


Lones Tuss
Applications Engineer
OutBack Power Technologies
17825 59th Ave NE, Suite B, Arlington, WA 98223
360.618.4383 Office | 425.213.8794 Cell
www.outbackpower.com

-----Original Message-----
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of frenergy
Sent: Tuesday, July 12, 2016 9:08 PM
To: RE-wrenches
Subject: [RE-wrenches] Mate3

Folks,

         I'd like to leave the Mate3 at the OB pre-assembled power center but be able to turn on-off the inverter at a remote location 50 feet away.  I assume I can still run some com wire of some kind to a push switch or toggle? connected to the inverter on-off landing of the control wiring terminal block in the AC side of the inverter.  Will the
Mate3 complain if on-off is done this way?

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org