[RE-wrenches] Mate3

[frenergy]

Folks,

         I'd like to leave the Mate3 at the OB pre-assembled power 
center but be able to turn on-off the inverter at a remote location 50 
feet away.  I assume I can still run some com wire of some kind to a 
push switch or toggle? connected to the inverter on-off landing of the 
control wiring terminal block in the AC side of the inverter.  Will the 
Mate3 complain if on-off is done this way?

Bill

Feather River Solar Electric
Bill Battagin, Owner
4291 Nelson St.
Taylorsville, CA 95983
530.284.7849
CA Lic 874049
www.frenergy.net