[RE-wrenches] PV output but no power

Mac Lewis maclewis1 at gmail.com
Sat Jul 2 14:17:40 PDT 2016


Kyocera had a batch of 120s and 85s that had bad solder connections from a
certain year. I'm not remembering the year at the moment but we are still
finding them.

Kyocera has been really amazing about honoring the warranty.

On Jul 2, 2016 2:52 PM, "Jerry Shafer" <jerrysgarage01 at gmail.com> wrote:

> Wrenches
> Bypass diods fail and may short
> Jerry
> On Jul 2, 2016 1:49 PM, "frenergy" <frenergy at psln.com> wrote:
>
>> I just came upon a small off-grid system: 12 volt, 4, Kyo 120's (I,mppt=
>> 7.1A; Voc = 21.7 or so), Trace C40 with display, etc.   The combiner has
>> fuses for each PV/landing.  At noon, output of the array is 10.5 amps.
>> Clamping the 4 pvs I get 5.5 amps on 2 PVs and 0.0 on 2 others.  I
>> disconnect leads from terminals in PV j-box of the 'dead' PVs and I get
>> Voc=18.5 (pretty hot day) and Isc= 6 amps. However when I reconnect these
>> same PVs to the combiner there is no change in combined amps.  Fronts and
>> backs of PVs look good, no burns, browns, bubbles in backsheet, under the
>> glass looks fine, its all good.  Inside the J-boxes look perfect/new.
>> Ideas?
>> Thx,
>> Bill
>>
>> Feather River Solar Electric
>> Bill Battagin, Owner
>> 4291 Nelson St.
>> Taylorsville, CA 95983
>> 530.284.7849
>> CA Lic 874049
>> www.frenergy.net
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive:
>> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160702/62efebca/attachment-0002.html>


More information about the RE-wrenches mailing list