[RE-wrenches] supply side connection

[Kristopher Schmid]

Excel in Wisconsin approves the milbank connectors.  I have also had other
utilities approve a dual sided entry insulated splice block (Polaris).

Kris
On May 13, 2016 4:50 PM, "jay" <jay.peltz at gmail.com> wrote:

> Has any one used the Milbank tap connectors?
> Or maybe get them approved by the utility?
>
> It would require meter removal, but seems to be a good alternative to a
> piercing connector.
>
> thanks
>
> jay
>
> Peltz power
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160517/528e62f4/attachment-0002.html>