[RE-wrenches] Optimal 200 or 225 Amp Square D MSP All-in-One meter for CT Clamps

[jerrysgarage01]

Can you get a meter main with only one breaker and then get a distribution panel and put all all loads there


Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone

<div>-------- Original message --------</div><div>From: Gregory Seelhorst <gseelhorst at gmail.com> </div><div>Date:02/17/2016  6:23 AM  (GMT-10:00) </div><div>To: RE-wrenches <re-wrenches at lists.re-wrenches.org> </div><div>Subject: [RE-wrenches] Optimal 200 or 225 Amp Square D MSP All-in-One meter	for CT Clamps </div><div>
</div>Wrenches -

Does anyone know of a good spec for a 200 or 225A Square D Main Service Panel which has feeders between the meter and Main Disconnect and would be ideal for 150A CT clamps for monitoring whole house consumption?

I'm finding most MSPs have a short, flat bus between the meter and Main Disconnect which requires the Rigowski Coil (requiring more expensive and unreliable hardware).

Thank you for your help in advance.

Regards,

Greg Seelhorst
NABCEP PV Installation Professional #092907-16


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160217/c0150d93/attachment-0003.html>