[RE-wrenches] Battery corrosion issue

Dan Fink danbob88 at gmail.com
Wed Jan 20 14:00:04 PST 2016


I'd try an EZ-out screw extractor bit. Handy to have a whole set in the
work truck anyways.

Dan Fink
Adjunct Professor, Ecotech Institute
IREC Certified Instructor™ for:
~ PV Installation Professional
~ Small Wind Installer
Executive Director, Buckville Energy
NABCEP Accredited Continuing Education Providers™
970.672.4342



On Wed, Jan 20, 2016 at 2:53 PM, Kristopher Schmid <solman at legacysolar.com>
wrote:

> Greetings,
>
> Do any of you battery gurus have a suggestion for a method of removing a
> bolt remnant that is corroded into a flag terminal.  Both sides snapped off
> flush with the flag.  I was thinking try to drill it out or maybe a small
> gear pulling tool?  I will never again use the non stainless hardware
> supplied by the manufacturer...
>
> Picture attached for reference.
>
> Thanks!
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160120/a7f77411/attachment-0002.html>


More information about the RE-wrenches mailing list