[RE-wrenches] Battery Charge Settings.

[Chris Mason]

What about temperature sensors bolted to the lugs? Surely a physical
thermal transfer over metal is more accurate that the external case would
be?

On Tue, Jan 19, 2016 at 12:42 PM, frenergy <frenergy at psln.com> wrote:

> Steve,
>
>         Yikes, so to confirm, even on your or anybody's double-walled
> cells the best BTS location is down the side of the cell.  It seems so
> thermally distance/insulated from the electrolyte and lead which we are all
> so concerned about protecting.  I've said this before, no doubt I'm in the
> minority but I would be willing to insert a polypropylene encased BTS
> sensor into a 1/4" hole in the top of a cell, sealed with a viton O-ring.
> We are talking about some battery packs costing $5,10,20K, I consider it
> one of my prime services is to insure the best lifecycle of the pack.  It
> seems this arrangement would insure the BTS is doing a much better job of
> adjusting CC settings.
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983
> 530.284.7849
> CA Lic 874049
> www.frenergy.net
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com <http://www.cometenergysystems.com>
264.235.5670
869.662.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160119/2c06c3ed/attachment-0002.html>